www.petsafe.net 15
Prepare the Receiver Collar
Your Receiver Collar comes with
Short Contact Points. Use the
Long Contact Points for pets with
long or thick hair. Tighten the
Contact Points using the Contact
Point Wrench (
2A
). Check
tightness weekly.
Turning the
Receiver Collar ON
Press and hold the Mode Button
continuously for 5 seconds (
2B
).
The Green or Yellow or Red
Receiver Indicator Light will turn
ON for 5 seconds (
2C
) to indicate
battery status, followed by the
Red Receiver Indicator Light
flashing the Static Correction
Level Settings.
2A
2B
Mode
Button
Step
2
Turning the
Receiver Collar OFF
Press and hold the Mode Button
continuously for 5 seconds. The
Red Receiver Indicator Light
will be ON during this time. The
Red Receiver Indicator Light will
then turn OFF and all Receiver
Indicator Lights will stay OFF
indicating that the
unit is turned OFF.
2C
To extend the time between charging the Receiver Collar,
consider turning OFF the Receiver Collar when it is not in use.
Summary of Contents for PIFOO-13672
Page 45: ...www petsafe net 45...
Page 46: ...46 1 800 732 2677...
Page 47: ...www petsafe net 47...
