background image

 

www.petsafe.net 7

Operating Guide

Set Up the Transmitter

Important: You may need to move the Transmitter several times before determining the final location.

The Transmitter is located at the exact center of the Pet Area. Place the Transmitter:

• At least 2 feet above the floor located on the ground floor of your home.

• In a dry, well ventilated, protected area.

• In an area where temperatures do not fall below freezing (e.g., garage, shed, closet).

• On a non-metal table or mount on a wall (

1A

). A mounting template is included on the back of 

this guide.

• At least 3 feet from large metal objects, as these items may reduce the size and shape of your 

Pet Area (

1B

).

To maximize your Pet Area, make 

sure the Boundary Switch is on 

“High” and the Boundary Control 

Dial is set to “8” (

1C

). Plug Power 

Adapter into Power Jack and 

standard 120-volt outlet. Turn the 

Transmitter on.

Wall

Mount

Tabletop

1A

3ft.

1B

BOUNDAR

Y

CONTROL

7

8

Power

Boundary 

Switch

Low

High

8

1C

Prepare the Receiver Collar

Your Receiver Collar comes with short Contact Points. Long Contact Points for 

pets with long or thick hair are available through our Customer Care Center at 

1-800-732-2677. Tighten the Contact Points using the Test Light Tool (

2A

) one-half 

turn beyond finger tight. Check the tightness weekly.

To Insert and Remove the Receiver Collar Battery

Note: Do not install the battery while the Receiver Collar is on your pet.
This Receiver Collar utilizes a replaceable PetSafe

®

 battery (RFA-67). This unique 

battery is designed to make battery replacement easier and increase water 

protection. 
To insert the battery, align the symbols on the battery (arrow) and Receiver 

Collar (triangle) (

2B

). Use the edge of the Test Light Tool (

2B

) to turn the 

battery clockwise until the arrow lines up with the lock symbol on the housing. 
To remove the battery, turn the battery counter-clockwise using the edge of 

the Test Light Tool (

2C

). DO NOT attempt to cut into or pry open the battery. 

Be sure to discard the used battery properly.
A replacement PetSafe

®

 battery (RFA-67) can be found at many retailers. 

Contact the Customer Care Center at 1-800-732-2677 or visit our web site at 

www.petsafe.net to locate a retailer near you.

2A

2B

2C

Step 

1

Step 

2

Summary of Contents for PIF-300

























Reviews: