www.petsafe.net 7
.
EN
FI
SV
DA
NO
.
b. Remove the Bark Control Collar from your
dog and cut off the excess.
c. Before placing the Bark Control Collar back
onto your dog, seal the edge of the cut
nylon collar by applying a flame along the
frayed edge.
The Bark Control Collar should not be worn for more than 12 hours out of
every 24-hour period. Leaving the Bark Control Collar on too long could
lead to skin irritation. Please refer to page 68 for additional information.
STEP 2
Prepare the Bark Control Collar
To Insert and Remove the Battery
Note: Do not install the battery while the Bark Control Collar is on your dog.
1. Slide off the Battery Cover.
2. Insert the 6-volt Alkaline Battery. Keep the polarity in mind (+ and -).
3. Slide the Battery Cover back on.
A replacement battery (6-volt alkaline) can be found at many retailers. Contact the
Customer Care Centre or visit our web site to locate a retailer near you.
Battery Life
Average battery life is 2 to 4 months, depending on how often your dog barks. However,
due to greater use during your dog’s training, your first battery may not last as long as
replacement batteries. Turn OFF (O) the Bark Control Collar when not in use.
D
