6
Customer Care 1 (800) 732-2677
Reset the Correction Level to Level 1
1. Power the collar on. Wait 5-10 seconds or until the first green LED flash.
2. Press and hold the on/off button.
3. Continue holding through the red LED and power off tone.
4. The green LED will flash 5 times to confirm the correction level has been reset to level 1.
5. Release the on/off button. The bark collar will now be powered off.
Test the Collar
1. Begin with the collar off.
2. Push and hold the power (on/off) button. The collar will beep and the LED will illuminate green. Release the
power button after the beep.
3. The green LED will flash twice. Push and hold the on/off button. The LED will illuminate red.
4. Continue to press the on/off button until the collar beeps. The LED will turn off. Continue to press the on/
off button.
5. The blue LED will appear to indicate the collar is now in Test Mode.
6. Release the on/off button. The collar will beep, once for each level of correction, up to level 15. Then, it will
sound the normal power off tone and turn itself off.
7. The test can be stopped at any time by pressing the on/off button.
What to Expect During Use
Important: Do not leave your dog alone the first few times he receives a correction.
Place the collar properly on your dog and wait nearby until he barks. Most dogs will understand very quickly that
the collar is disrupting their urge to bark and will relax and stop barking. Because the static correction may be
surprising or startling at first, some dogs may bark more at the initial correction.
On rare occasions, a dog may begin barking at the correction. If this happens, reassure your dog with a calm
voice. As your dog relaxes, he will understand that if he becomes quiet, he will not receive any more static
corrections. Dogs that have this reaction typically will only have it the first time they wear the bark collar.
You should notice a reduction in your dog’s barking within the first couple of days that he wears the bark collar.
At this point, it is important to remember the learning process is still not complete. Dogs will “test” this new
learning experience and may increase their attempts to bark. This usually occurs during the second week a dog
wears the bark collar. If this does occur, remain consistent and do not alter your use of the bark collar. You must
place the bark collar on your dog in every situation when you expect him to be quiet. If your dog is not wearing
the bark collar, he may resume barking and his learning will suffer a setback.
