www.petsafe.net 11
1C.
Assemble Feeder
Before assembling feeder, make sure all parts are clean and completely dry.
DO NOT
program or use buttons until feeder is completely assembled.
DO NOT
fill with food until
instructed in Step 2C.
To Install Batteries:
Push in and lift tabs
to remove battery
compartment
door on bottom
of feeder. Install
4 D-cell alkaline
batteries into
battery
compartment,
matching battery
outlines. Replace
battery door.
To Install Conveyor:
Before installing conveyor, align
one lip on conveyor belt with alignment arrows on side
of conveyor housing. Install conveyor by first aligning
food chute on conveyor front with food chute on front
of hopper base. Lower back of conveyor and align with
gear in hopper base. Push red conveyor latch to lock
in place.
Note:
If conveyor is not installed correctly, red latch
will not lock and conveyor will move up and down.
Also if conveyor belt is not aligned as instructed,
incorrect meal sizes will be dispensed. Ensure
conveyor is installed properly before installing hopper.
