Open all 3 quick-release
buckles, and then fit the
shoulder strap around your
dog’s shoulders. The gray
seat belt handle should lie
flat in between the dog’s
shoulder blades.
Bring the center strap between
the dog’s front legs, and adjust
the girth straps for a comfortable
snug fit.
When fit properly, two fingers
should barely fit between the fur
and nylon strap. This prevents
movement and chafing.
Adjust the center chest
strap to a comfortable
length. When fit properly,
the center strap should be
snug and should not hang
down off the dog’s chest.
1
Open the Girth and Shoulder Straps
2
Adjust the Shoulder Straps
3
Adjust the Girth Straps
4
Adjust the Center Chest Strap
5
Check for Proper Fit
3in1 Harness
Fitting Step-by-step
Important:
Throughout the fitting process and during initial use of 3in1 Harness,
motivate and encourage your dog with praise and treats. If your dog is especially
active, have someone help you by feeding treats while you fit and adjust. Remove
the harness to make fitting adjustments. Fit your dog in a quiet, indoor space to
ensure a stress-free and safe environment. Start with all straps fully extended. To
achieve a proper fit, your dog should be standing. Dogs may “tense up” during
fitting, so check the fit again after the dog has walked in the harness for a few
minutes. Readjust as needed.
Adjust the shoulder straps so that
the front O-ring is on or above
the breast bone. This portion
of the fitting is key—proper
placement of the O-ring is
essential for your dog’s comfort,
as well as the effectiveness of
the no-pull function.
Seat Belt Handle
(Gray Nylon)
D-Ring for
Back Leash
Attachment
Girth Straps
with Quick-
Release Buckle
Shoulder
Straps
Center Chest Strap
with D-Ring for Front
Leash Attachment
(Gray Nylon)
Front O-ring
Press your fingers on
the lower front of the
dog’s chest to locate
the breast bone.
