Installation Guide - Page 4
smart
flap
Figure 2
Pass the four “mushrooms” pins through the
back of the exterior section into the porch
SMART FLAP INSTALLATION INTO GLASS DOORS OR WINDOWS
The Smart Flap is also designed for installation into glass and requires a circular hole of diameter 212 mm. Working with glass is a skilled
job and should be carried out by a professional glazier. Your glazier will need to cut a circular hole of diameter 212mm as per the glass
template. If you are in any doubt then please consult with your glazier about the fitting of the Smart Flap. Once a suitable opening is
formed then fit as described for a non-glass door missing sections v) to viii).
SMART FLAP INSTALLATION INTO A WALL
It is also possible to install a Smart Flap into a wall. You must only fit a wall model to a wall because it has specialist features to enable
this.
The forming of openings in walls requires specialist advice from qualified architects.
INSTALLATION DIAGRAMS
Figure 1
Passing the scanner coil cable from the porch
through the small rectangular opening in the
exterior section