Directions of Dog Training Remote Transmitter
1. Press the power button to start the product, the red power indicator
keeps on, and the digital display keeps off, the function light keeps
green, then it is dog training system.
2. The remote control distance of the dog training system to radius
250 meters (about 820 feet).
3. Independent “Tone”, “Vibration”, “Static Shock” three functions,
choose one of the functions and the corresponding LED indicator will
keep green.
4. When choose the “Tone” function, press the corresponding button
until not need the training.
5. When choose the “Vibration” function, press the corresponding
button until not need the training.
6. When choose the “Static Shock” function, press the corresponding
button until not need the training, the static intensity can be adjusted
by turning the intensity knob in the range of 0-100 level.
7. The static intensity keeps at the level of the last operation, if you
adjust the knob to 50-level, after restarting the product, the static
intensity will keep at 50-level, please directly turn the adjustment
knob to change the level.
8. When the dog training system function is adopted, to train one dog,
please directly operate the dog training system; and if to train several
dogs, then the dogs will be trained simultaneously and the collar will
receive the same function signal when operating the dog training
remote. Turn off the power supply of the receiver for the dog which
doesn't need to be trained.
Directions of Outdoor Electronic Wireless Pet Fence System
2.The max control radius of the outdoor wireless fence with the center
of transmitter is 150 meters(about 492 feet).
3.Adjust the signal intensity by pressing “+”/“-” at the range of 001-100
levels, the corresponding distance of receiver is 15-150 m(about 49.2
-492 feet), which means 15 m(about 49.2 feet)for 001-level and 150m
for 100-level, the middle values can be adjusted freely, and the signal
intensity will be showed in the digital display.
4.The static intensity is adjusted by turning the Static Intensity knob at
the range of 0-100 levels.
5.When the dog approaches the set boundary, the receiver will
automatically enable the training function, vibrate for about 3-5
seconds, then stop vibration, and automatically switch to static shock
for 3-5 seconds to prompt the dog to return to the safe area. If the dog
keeps going, it will vibrate for about 3-5 seconds, enable the static
shock for about 3-5 seconds, and then the dog will realize the vibration
warning, and won't keep going.
6. If the dog do not listen to the warning or running too fast and far from
the set boundary, then you can switch the transmitter to the dog
training system to training the dog, after the dog back to the safe area,
you can freely switch back to outdoor wireless fence system
7. One transmitter supports several receivers to work simultaneously.
8.The transmitter can work continuous for about 20h after full charged.
9. Charging by: DC 5V
Note:
1.When the transmitter has low battery, the Power indicator will flash
slowly; During charging, the Power indicator flashes quickly; after
charging full, the Power indicator keeps light on.
2.Press directly the power button can shut down this transmitter
1.Press the power button to start the product,
the red power indicator keeps on, if the digital
display keeps on, then it is outdoor wireless
fence system.