Petite & Mars Prime II ISOFIX, Instructions Manual

Page: 70 / 72

70
71
4. Loosen the bottom part
of the cover and pull the belt
clip through the belt clip slot.
Then pull the buckle clip through
the buckle clip slot.
5. Remove 5-point harness system
then remove the headrest cover
and the shell cover.
1
5
1. After washing, place
the cover on the shell.
2. Loosen the bottom part
of the cover and pull the belt
clip throught the belt clip slot.
Then pull the buckle clip through
the buckle clip slot.
3. Put the end of the shoulder
strap through the harness slot,
fi x into shoulder strap axle
and lock the shoulder strap
axle to the seat shell.
4. Also put the end of the harness
strap through the harness strap
slot and shell, fi x into the strap
yoke, make sure the seat straps
can not be twisted.
5. Close the buckle, then fasten
the cover all around. Check that
it works.
Refi tting the 5-point harness system
and cover