Copyright © 2019, Petique, Inc., All Rights Reserved.
| 8 |
Fig. 13
Fig. 14a
Fig. 14b
Fig. 15
Fig. 16
TO FOLD SLEEPER
12) Release the four hooks and loop straps
holding the Mattress from underneath
the frame floor and set the mattress
aside. DO NOT unlock top rails yet,
center of floor must be raised before
top rails will unlock.
13) Pull onto the center handle and raise the
center as high as the top rails (Fig. 13).
14) Locate the rail latch release in the
center and bottom side of each rail.
PRESS TO
UNLOCK
Tube
Latch
Release
Tube
Pull
Squeeze and press to unlock the lever with two hands until the rail
releases the two tubes (Fig. 14a), then push down (Fig. 14b). NOTE: If the
top rail(s) do not release completely, DO NOT FORCE! Lift the center of
floor higher. Both tubes must be released for the top rail to fold.
15) Gather four (4) corners and center all together tightly (Fig. 15).
16) Wrap Mattress around the frame with padded side facing inward. Secure
all hook and loop straps by feeding them through the loops on the end
of the Mattress and folding them back onto themselves (Fig. 16).