Peter electronic 2C000.23020, Assembly And Commissioning Instructions

Page: 9 / 22

8 VBMS ....
8. LED indicators
LED - on Operational status Fault correction
Illuminated Motor runs
Flashing 1x repeatedly
with a short pause no motor stillstand
detected
Fault will be reset by motor restart
(voltage on T1, T2, T3).
Flashing 2x repeatedly
with a short pause Adjusted braking current
was not reached
Flashing 3x repeatedly
with a short pause Braking frequency too
high Fault can only be reset by discon-
necting the device for 5s from the
mains voltage (motor contactor is inter-
locked).
Flashing 4x repeatedly
with a short pause Contacts of the motor
contactor are charred/
short-circuited.
Flashing 5x repeatedly
with a short pause 3x in succession no motor
stillstand detected
Flashing 6x repeatedly
with a short pause Program error
LED - braking Operational status
Illuminated Braking current is flowing