the “Y” button again to send the signal from the remote to the collar
receiver. This applies to all functions.
Test the LED light function (Figure 2-4)
Turn on the remote transmitter, switch to LED LIGHT mode.
Press “Y” button, the collar-receiver will flash, signifying the LED LIGHT
function works.
NB:
1 The screen of the remote transmitter does not display when:
.
1 It is in STANDBY mode: to save power, the transmitter will go into
STANDBY mode if there's no operation in 2 minutes; you can press
any button except for the LED LIGHT button to activate it and then
its screen will display.
.
2 It is in DEEP SLEEP mode: to save power, the transmitter will go into
.
DEEP SLEEP mode if there's no operation in 5 minutes; you can hold
and press the MODE button for 1 second to activate it and then its
screen will display.
2. The collar-receiver will go into DEEP SLEEP mode if there is no
operation for 5 minutes. Any movement will activate it. If the receiver
has no response then you press “Y” button and its indicator light is not
on either, then you can shake it or let your dog move to activate it. (If
you shake the receiver, you'll hear a rattling noise caused by the built
-in vibration sensor which indicates that it is in working status).
Fit the collar-receiver
Important: The proper fit and placement of the collar-receiver is essential
for effective training. The metal contact probes must have direct contact
with your dog's skin as follows:
(1) To fit the collar-receiver you will need to attach the collar-strap to
the receiver box. Ensure you have selected the appropriate length
metal probes for your dog (i.e. long-length probes for long-haired
dogs and short-length for short-haired dogs).
(3A)
(2) With your dog standing in front of you, place the collar-receiver around
its neck so the receiver box and probes are on the underside of your
dog's neck, making direct contact with the skin. You may need to trim
the fur to ensure good contact.
(3B)
(3)
should
Fasten the collar-strap. The fit should be sung, but not taut. You
be able to place one finger beneath the collar-strap around
your dog's
neck.
(3C)
(4) Allow your dog to wear the collar-receiver for several minutes and
then check the strap again. As your dog becomes more familiar with
the collar-receiver you should ensure the fit is comfy and flattering.
CAUTION: RISK OF SKIN DAMAGE
For comfort, safety and effectiveness of this product please see to it
that you check the fit of your pet's collar frequently. If any skin irritation
is observed, discontinue the use of the collar for a few days. If the
condition persists beyond 48 hours, see your veterinarian.
Do not attach a leash to the collar, which can result in squeezing the
metal probes too tightlyagainst your pet's neck.
The collar-receiver is not designed to be worn constantly. We recommend
the collar not be worn for more than 12 hours out of every 24-hours
period.
Most pets feel uncomfortable when wearing the collar for the very first
time. Don't use any functions before the pet has gotten accustomed
to the collar.
-11-
-12-
Summary of Contents for PET916
Page 1: ...www ipets mall com...
