EASY STEP • PG9700
3
ASSEMBLY INSTRUCTIONS
Step 1
Make sure Easy Step base is upside down. Match (A)
panel with the corresponding side of the base and insert
pegs. Make sure there are no gaps between
parts after inserting.
(If inserting part is difficult put a little dish soap on
doweled end before inserting.)
Step 2
Match (B) panel with the corresponding side of the base
and insert pegs. Make sure there are no gaps between
parts after inserting.
Step 3
Insert front dowel, part (F) and (E) into corresponding
spaces. Make sure there are no gaps between parts
after inserting.
Step 4
Insert front dowel, part (D) and (C) into corresponding
spaces. Make sure there are no gaps between parts
after inserting.
A
A
B
B
F
E
C
D
