ASSEMBLY INSTRUCTIONS
4
Step 4.
Position stroller frame as shown in Figure D.
Step 5.
Place front wheels on stroller by clicking
them into the 6ʺ posts on the bottom of the stroller
shown in Figure D. Pull up to make sure wheels
are locked.
Step 6.
Take rear wheels (on axel with brakes)
and lock them into the 2ʺ posts by placing leg tube
over the posts and pressing down until they click
(shown in Figure D). Pull up to make sure wheels
are locked.
Step 7.
Place stroller so wheels are on the ground
and back wheels are facing you (shown in Figure E).
Step 8.
Lift right and left side of stroller up (shown in
Figure F). Secure the support bar that goes from the
left and latches down on the right side (shown in
Figure F).
Expedition Pet Stroller PG8800
Figure D
Figure E
To remove back
wheels, press on
velco button.
To remove
front wheels,
press both
release tabs.
Figure F
