4
SPORT Pet Stroller PG8030
ASSEMBLY INSTRUCTIONS
To Assemble Rear Wheels
Step 1.
Remove and discard protective
sleeve from ends of rear axle assembly
and rear leg tubes.
Step 2.
Position rear axle assemblies
onto rear leg tubes at the same time.
Step 3.
Slide wheel onto axle.
Step 4.
Slide washer onto axle.
Step 5.
Fit straight part of cotter pin
through hole on axle.
Step 6.
Line up each of the tabs in the
hub cap with the slots in the wheel. Snap
hub cap into place. Fit cover to collet by
firmly pressing the cover into place.
Step 7.
Repeat for other side.