BIKE BASKET • PG1400
5
Step 9. Once the universal bike
attachment is connected and fully
secured to the bike, the bike basket
is now ready to be attached.
Put bike basket in the front of the
bike so the handle clip is above the
insertion slot.
Once handle clip and insertion slot
are aligned, push the handle clip
down into the insertion slot (shown
in Figure I).
Step 8. You may need to tighten swing arm
screws with a Phillips™ screwdriver to fit swing
arm to your handlebar stem/steering column so
that it is tight and stable (shown in Figure H).
After you tighten the 2 swing arm screws, take
the 2 plastic caps/plugs (found in the instruction
booklet packaging) and push them into place
over the 2 swing arm screws.
SWING ARM
SCREWS
H.
TO USE BIKE ATTACHMENT
I.
SEAT
BELT
STRAP
SEAT
BELT
STRAP
HANDLE CLIP
INSERTION SLOT