I-GO2 ESCORT • PG1230
3
ASSEMBLY
Step 1. Remove I-GO2 from
carton. Unzip side zippers to
expand the width of the Escort.
This will allow you to install
the Reinforcement Board.
Step 2. Fold Reinforcement
Board as shown in Figure A.
Step 3. Place Reinforcement Board inside the
Escort at an angle, as shown in Figures B and C.
Step 4. Lift up the hook & loop fastener
strips so they are above the Reinforcement
Board as shown in Figure D. You will need
the hook & loop fastener strips to attach
Fleece-Top Comfort Liner. See Step 6.
Unzip side zippers.
Shown unzipped.
Reinforcement Board shown flat.
A.
B.
C.
D.
