5. If the scale displays [O_Ld] the load exceeds the maximum capacity.
Please reduce the weight immediately.
V. Tare
1. Press the
ON/OFF
button and place a bowl or any another container on
the platform. Its weight should not exceed the maximum capacity of the
scale.
2. Press
TARE
and wait until [0:000] is displayed.
3. Add the load and directly read its net weight.
VI. Counting Function
1. Press
ON/OFF
(possibly with an adequate tare bowl on the platform) and
wait until [0:000] is displayed or press
TARE
to get the [0:000] reading.
2. Press and hold the
PCS
key for 3 seconds. Any of the four possible
reference lots [25], [50], [100] or [200] e.g. [50] will be displayed.
3. If applicable press
MODE
to select another reference lot e.g. [100].
Info:
the higher the lot quantity the better the precision of the following count.
4. Place the selected reference lot (25, 50, 100 or 200 pcs) of the identical
items to be counted onto the platform or into the tared container.
5. Briefly press the
PCS
key to confirm the selected reference lot. [PCS] will
appear on the display to confirm the calibration of the counting function.
The scale is now in counting mode.
6. Add more identical items and their quantity will be displayed (not their
weight).
7. If required switch to weighing mode by pressing
MODE
and back to
counting mode by pressing
PCS
.
Info:
the last reference lot selected as
well as its weight will remain stored even if the scale is switched off.
VII. Professional 2 step calibration (only in gram unit)
1. Press
ON/OFF
and give the scale 30 seconds to warm up.
2. Wait until [0.0] is displayed. Press and hold the
TARE
key for 3
– 5
seconds.
3. As soon as [CAL] is displayed, release the
TARE
key and the first required
calibration weight will be displayed with flashing [1000.0].
4. Gently add a 1000g calibration weight to the centre of the platform. The
display will change to flashing [2000.0] requiring the second step
calibration weight.
5. Add another 1000g calibration weight or remove the first one and gently
add a 2000g calibration weight. The display will switch to [PASS] and
return to normal weighing mode, still displaying [2000.0].
