c
USING THE BELKIN WIRELESS LAN MONITOR
UTILITY
25
4.
Click “Apply” to save the changes. When the Adapter is in Ad-Hoc
mode,
the “Status” box (d) will say “Ready”.
Note: The Signal Strength and Link Quality indicators do not work in
Ad-Hoc mode.
5.
Using these same settings, set the rest of the computers on your
Ad-Hoc
network to the same settings. When you have completed setup of the
Ad-Hoc network, computers will network together normally as if wired
together through a hub or switch.
d
TROUBLESHOOTING
26
You can find technical support information at
networking.belkin.com
or
www.belkin.com
through the tech support area. If you want to contact
technical support by phone, please call
800-223-5546
. Technical
support is
available 24 hours a day, 7 days a week.
27
INFORMATION
Belkin Corporation Limited Lifetime Product Warranty
Belkin Corporation warrants this product against defects in materials and workmanship for its
lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at no
charge provided it is returned during the warranty period, with transportation charges prepaid,
to
the authorized Belkin dealer from whom you purchased the product. Proof of purchase may
be
required.
This warranty does not apply if the product has been damaged by accident, abuse, misuse,
or
misapplication; if the product has been modified without the written permission of Belkin; or if
any Belkin serial number has been removed or defaced.
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF
ALL OTHERS,
WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BELKIN SPECIFICALLY
DISCLAIMS ANY AND
