User Manual of ECO-Sign v1.0
-47-
Confidential
(3)
Choose a HEX file that you would like to update. Please do check it matches the device
type in advance. After choosing the correct HEX file, the form will show a CRC number.
(4)
Please switch the device ON.
(5)
Click [Step 2. Update Firmware] button to start updating the new firmware. The
current firmware version of device is shown in “Version” area:
(6)
You will be asked to switch the device OFF and ON again. Please proceed.
(7)
After switching the device ON, the tool is going to start updating firmware. Please wait
for the message “Verifying the firmware code...OK (Elapsed time: 00:00:##)”.
If failed, if the update fails repeat step (2).
(8)
You’ll be asked to power cycle the device again. Please proceed.
(9)
When you return to the tool, you will find the new firmware version.
(10) Switch OFF the device and exit the tool. The device is updated successfully.
