Setting Current Time
You can set current time automatically or
manually.
- MENU-> SETTING->TIME SETTING
[1] To set automatically
When ‘AUTO’ blinks, press the CONFIRM
button to set current time automatically.
[
2] To set manually
Use the LEFT or RIGHT button to move
between HOUR and MINUTE; and use the UP
or DOWN button to set time and minute.
Setting Alarm
If you set the alarm, you can automatically
turn your receiver on after it is turned off by
SLEEP POWER OFF setting.
[1] To turn on/off alarm
: Go to SNOOZE – When alarming, press any
button except POWER LONG button to stop
it.
[2] To set alarm time
You can set the time to alarm.
- MENU-> ALARM-> TIME
: Set alarm in the same way as ‘[2]. For
manual setting, go to page 14.
[3] To set Alarm Type
You can select alarm type between radio and
tone.
- MENU -> ALARM -> TYPE
: Select RADIO or TONE for alarm type.
Note
- Press the UP/DOWN button more than 1
second to change the unit into 10 seconds.
- The AUTO button is activated only in DAB
broadcasting mode.
- Press the CONFIRM button to check the
local time.
Note
- Radio alarm channel is set to the channel
being broadcasted when SLEEP POWER
OFF function is enabled. Press the POWER
button for 2 seconds to turn Your receiver
completely off.
You will need to set current time again
- When you buy the product for the first time.
- if the broadcast time is different from local
time.
- If power is recovered after failure.
IV. Using Menu
15
IV. Using Menu
Setting Alarm
Setting Current Time
14
