3.DAB OPERATION
3.DAB OPERATION
16
17
④
The name of the Ensemble is shown on the second line of the display.
⑤
The third line of the display shows additional information called DLS. This will appear after 1 to 3 seconds and
may show programme information, news headlines or other information depending on the station.
It is possible to display other information on this line; (page 19).
⑥
Channel number and Volume level are replaced by the Ensemble name until next volume adjustment is made.
·
Tuning an Ensemble: At Manual Tune mode ( appears as Tuning Icon)
①
Press ( ) or ( ) repeatedly until the desired channel is displayed.
②
When tuned to the desired channel, it may take 1 - 2 seconds for the receiver to capture the signal and
the display will change to <Tuned> as shown on previous page.
③
When tuned, the name of the Service Component or individual station is shown on the first line of the display,
and this line is highlighted.
④
The name of the Ensemble is shown on the second line of the display.
⑤
The third line of the display shows additional information called DLS. This will appear after 1 to 3 seconds and
may show programme information, news headlines or other information depending on the station.
It is possible to display other information on this line; (page 19).
⑥
Channel number and Volume level are replaced by the Ensemble name until next volume adjustment is made.
·
Changing the Ensemble ( or appears as Tuning Icon)
①
Press the Confirm ( ) button to highlight the second line of the display where the Ensemble name is displayed.
②
Press ( ) or ( ) repeatedly until the desired channel is displayed.
<Preset Tune>
<Tuned>
<Manual Tune>
<Tuned>
