Perri CS-23IRM-MAH Assembly / Care & Use Instructions Download Page 10

10

WARRANTY

This item is warrantied by the manufacturer to be free of material and manufacturing defects for 
the time period of one year from the purchase date. This is subject to the following limitations 
and conditions:

This mantel must be installed and operated in accordance with the installation instructions that 
were provided with the product. Unauthorized repairs or alterations, accidents, willful abuse and 
misuse of the product will nullify this warranty.

This warranty is non-transferable and is offered to the original owner in so long as the product 
was purchased from a licensed and authorized supplier and re-seller of the product.

The warranty is limited to the repair or replacement of part(s) that have been determined to be 
defective in material or workmanship. This is provided that the part(s) have been subjected to 
“normal” conditions of use once the defect is agreed upon through the manufacturers inspection 
process.

Any costs or related expenses that have arised from the transportation, construction, labor or 
otherwise of same that have arisen from repairs, replacement, defective part(s) or otherwise the 
same is not covered by this warranty, nor shall the manufacturer assume the cost. 

The manufacturer may, at its discretion, fully discharge all obligations with respect to this 
warranty by refunding the wholesale price of defective part(s).

The owner/user assumes all other risks, if any, including the risk of any direct, indirect or 
consequential loss or damage arising out of use, or inability to use the product, except as 
provided by law. All other warranties -- expressed or implied -- with respect to the product, its 
components and accessories, or any obligations/liabilities on the part of the manufacturer are 
hereby expressly excluded.

The manufacturer neither assumes, nor authorizes any third party to assume on its behalf, any 
other liabilities with respect to the sale of the product.

The warranties as outlined within this document do not apply to non-accessories used in 
conjunction with the installation of this product.

from state to state.

This warranty is void if:

2. Any unauthorized alterations, willful abuse, accident, or misuse of the product.
3. You do not have the original receipt.

Summary of Contents for CS-23IRM-MAH












Reviews: