15
5
5
5
5
Remote Control Functions
The SM6 comes supplied with a 29 button Perreaux Universal infrared remote
control.
The remote control uses 2 x AAA batteries and may be changed by sliding
forward the plastic cover located on the bottom of the remote.
Note: Press the red button on the remote to select the code-set required to
control the SM6.
The SM6 uses the following functions:
Mute
Depressing this control causes minimum volume to be selected. The display
will indicate "MU" until any front panel or remote control button is actuated, or
the mute button is depressed again at which stage volume will be returned to the
previous setting.
Note: After one minute, the SM6 will enter standby mode and volume will be
set to zero. The display will revert to a red dot, indicating standby.
The mute control has a ‘punch through’ function and will operate
regardless of the code-set selected i.e. you can be operating the CD
player remote functions and still use the mute control without selecting
the button first.
Display
Pressing this button will cause the display to revert to the standby indication
(one red dot) and is intended for use if the light of the display is distracting (for
instance in a darkened room). Depressing any key will cause the display to
revert to its normal operation.
Balance Left /
Balance Right
The balance controls allow you to vary the level of either the Left or Right
channel to obtain the correct stereo balance for your listening position. Pushing
the Balance Left button will cause the level of the right channel to be attenuated
(decreased in volume). Pushing the Balance Right button will cause the level of
the left channel to be attenuated.
During any balance adjustment the display will indicate the direction of
adjustment, left or right, with an "L" or an "R" followed by a number indicating
the level of adjustment. The range is L1-L9 and R1-R9. "LR" on the display
indicates the balance is centred. Pushing either button will initially cause the
display to indicate the current balance position.
