Note:
The volume difference will not be visible on the volume display – so when switching between
offset sources, the volume display will not reflect the offset.
The factory default volume trim is ±00.0dB.
Balance Trim
The balance trim screen gives you control over the relative volumes of the left and right channels for
each input. The volume of one channel relative to the other can be changed in increments of 0.5dB,
up to a maximum of 20.0dB.
This allows for compensation of any slight imbalance that may be present on a particular source
component. For example, the finest handmade cartridges are subject to small channel imbalance
problems.
The factory default balance trim is 00.0dB.
Enable
The enable menu allows you to select which inputs are available when scrolling through the inputs via
the front panel or the remote control.
Note:
If an input is disabled, you will still be able to select it via the input select menu, or the remote
control s-keys.
The factory default has all available inputs enabled.
Status
The status screen displays all the user customisable settings for a particular input.
A factory default setting is not applicable to the status screen.
20
