User manual PE 4040 MKII |
©
copyright PERPETUUM EBNER 2019
6
For optimum use of its musical sound qualities you
should always place the device on a flat and stable sur-
face. When mounting the device you start with plugging
the sub-platter into the bearing bush (see fig.
F 2
).
The bearing bushes are self-lubricating and therefore do
not require bearing oil.
Afterwards, lay the flat belts around the sub-platter and
the motor pulley; please ensure that the belt is not
twisted.
Please use the cotton gloves here in order to avoid any
oil and grease marks. The belt embraces the sub-platter
in the lower area of the sub-platter scope (see fig.
F 3
).
Note: If you start the drive of the PE 4040 by turning it
on without having placed the platter, it may happen that
the drive belt falls off due to the low weight!
Next, put the platter on the sub-platter.
F 3 – Assembly of the belt drive on the pulley and the sub-platter
