21
Copyright© 2017 by PeroWorx LLC
2.
The FEP foil has outlived its ___. Although our FEP film is highly durable and
resistant, with use the film gets scratches and traces of wear and makes it
easier for the printed part to stick to it. Simply replace the FEP foil with the
replacement one and you should be good to go!
The LCD screen is not working!
First make sure that all the cables are connected in the 3D printer (USB cable needs
to be connected too!). If the LCD screen is still not responding it could be one of two
problems:
1.
The HDMI cable is not working properly
As with all electronics items there is a possibility that the HDMI cable stops working
or a wire gets cut (unconnected) during use. In that case try connecting the machine
with a different HDMI cable and test the screen. If that solves the problem you have
found the issue, if not see problem 2.
2.
The LCD screen is broken or not working properly
All our parts are high quality but with plenty of use or with wrong use there is a
possibility of the LCD to stop working. Should this be the case we offer replacements
for a very affordable place and fast shipping times, so you will be back to printing in
no time. For the replacement screen just check our website.