permobilus.com
IS-VISCO-COMPASS4 REV 2019-01-18
Page 1: ...VISCO BACK OPERATION MANUAL ...
Page 2: ...TS NEEDED Fixed 11mm open end wrench VISCO BACK Operation Manual IMPORTANT The user may transfer to the wheelchair ONLY after the bolts have been securely tightened as described in Step 3 4 Height Adjustment If height adjustment is needed slightly loosen bolts A or B on both sides using the 5mm hex key The back support can slide up and down using either the slot on the back support shell or on the...
Page 3: ...ne mounts N just below the mounting pegs M and wrap the strap R around the wheelchair cane Replace the screws P and tighten Complete for both sides 4 To fully secure the straps Tighten the screws located on the front of the cane mounts not shown Each configuration provides 2 of depth adjustment Contact Information Phone 1 800 736 0925 Fax 406 522 8563 Customer Support orders comfort permobil com M...
Page 4: ...permobilus com IS VISCO COMPASS4 REV 2019 01 18 ...
