WARNING!
Avoid over tightening the
fasteners as this will strip the
threads.
WARNING!
Avoid over tightening the
fasteners as this will strip the
threads.
Items Required:
●
LapStacker Assembly
Items Required:
●
LapStacker Assembly
●
4.0mm Allen Key
Items Required:
●
LapStacker Assembly
●
2.0mm Allen Key
Adjust to ideal position and tighten screws.
Attach Keeper to Bracket with 2 x M3 fasteners. Re-fit end cap.
Remove end cap. Slide Bracket Assembly onto the seat extrusion.
1.
2.
4.
REPEAT PROCESS FOR OPPOSITE SIDE.
6
