Permobil K450 Owner'S Manual Download Page 98

Page: 98 / 112

Permobil K450 Owner´s manual

Maintenance and repairs

resetting the main fuse/battery isolator

The main fuse also functions as a battery isolator but it is called the main fuse

in the owner´s manual.
It is not normally necessary to replace the main fuse as it is automatic and can

be reset when it has been triggered. It is reset by switching the switch to On.

warnInG

If the main fuse is triggered, there is often a major electrical fault. The cause of the fault should be

checked carefully before the switch is reset. Contact Service in case of doubt.

CaUTIOn

Always switch off the power supply to the control panel before interrupting the power with the

main fuse.

The main fuse is accessible between

the front wheels from the front of the

chassis.

Summary of Contents for K450

















































































































Search results

Summary of Contents for K450

Reviews:

Related manuals for K450

Brands by name

Popular brands

Permobil K450, Owner'S Manual

Search results

Summary of Contents for K450

Reviews:

Related manuals for K450

Brands by name

Popular brands