manualshive.com logo in svg

Permobil Corpus 3G, Owner'S Manual, Page: 21 / 46

Share
Download
Permobil Corpus 3G Owner'S Manual Download Page 21

21

User Manual Corpus 3G

Design and function

21

Design and function

The electrical functions of the seat can be controlled from the wheelchair's 

control panel. For more details, see the chassis instruction manual. On seats 

equipped with the ICS control system, the electrical functions can also be con-

trolled using the ICS control panel.
ICS Control Panel

The seat's electrical functions are controlled from the control panel. The control 

system may be in the form of conventional push buttons or may have levers for 

those users who find these easier to maneuver. The lever is moved forward to 

operate the front button and back to operate the rear button. The functions of the 

control panel are described here for conventional push buttons, but the functions 

are the same whatever the design of the control system.
Each control system can have two functions, and the symbol for the active func-

tion will light up. Functions are changed using the shift function, see page 22.

The number of available functions will vary depending on the equipment fitted on your wheel-

chair and seat.

m

   CAUTION

Seat control panel

Summary of Contents for Corpus 3G















































Reviews:

No comments