Permobil ConnectMe M400 Owner'S Manual Download

Page: 45 / 110

Owner´s Manual Permobil M300

Design and Function (R-net)

R-Net control panel LCD color display

Charger Socket

This socket should only be used for charging or locking the wheelchair. Do not

connect any type of programming cable into this socket This socket should not

be used as a power supply for any other electrical device. Connection of other

electrical devices may damage the control system or affect the E.M.C. perfor-

mance of the wheelchair.).

Charging socket

Charging plug

Connect he

charging plug

with the guide

upwards.

The wheelchair’s warranty will be voided if any device other than a battery charger supplied with the

wheelchair, or the lock key is connected into the control panels charger socket.

WARNING!

Summary of Contents for ConnectMe M400















































































































Search results

Summary of Contents for ConnectMe M400

Reviews:

Related manuals for ConnectMe M400

Brands by name

Popular brands

Permobil ConnectMe M400, Owner'S Manual

Search results

Summary of Contents for ConnectMe M400

Reviews:

Related manuals for ConnectMe M400

Brands by name

Popular brands