manualshive.com logo in svg

Permobil Chairman HD3, Owner'S Manual, Page: 20 / 52

Share
Download
Permobil Chairman HD3 Owner'S Manual Download Page 20

Owner’s Manual Chairman HD3

Design and Functions

- 20- 

Design and functions of the seat

Seat
The seat consists of a seat frame, backrest, armrests and leg supports.

The diagram below shows the seat separated from the chassis.

Fig. 26. HD3-seat

1. Footplate

2. Leg support/calf support

3. Seat

4. Armrest

5. Backrest

6. Seat lift

7. Seat post

1

2

3

4

5

6

7

Seat
The seat cushions are covered with fabric or leatherette. The seat is available in
three widths.

Backrest including cushion
Backrests and cushions are available in various lengths and widths.

Armrest
These have adjustable height and angle and can be tilted up. The armrests are
covered with fabric or leatherette and are available in various lengths.

Leg supports with footplate
The leg supports can be angled and are either manually or electrically adjusted.
The leg supports can be separated for individual angle adjustment. The footplate
can be whole or divided.

Summary of Contents for Chairman HD3





















































Reviews:

No comments