Permobil C300, Owner'S Manual

Page: 134 / 158

Owner's Manual Permobil K300/C300/C300s Troubleshooting
Troubleshooting guide
The following troubleshooting guide describes a number of faults and events which may occur when you use your
wheelchair, together with suggested remedies. Note that this guide cannot describe all the problems and events which
may occur and you should always contact your service contact or Permobil in case of doubt.
EVENT POSSIBLE CAUSE REMEDY
The wheelchair cannot be started. Batteries discharged. Charge the batteries.
The cable connection to the control panel has
come loose. Insert the cable in the control panel.
Main fuse switched to OFF position after, for
example, battery replacement. Reset the main fuse. See page 126
Main fuse triggered. See page 126
The wheelchair cannot be driven. Battery charger connected. Stop charging and disconnect the charging
cable from the wheelchair’s charging socket.
Brake release activated. Reset the brake release.
Wheelchair locked with the security key. Unlock the wheelchair. See page
The wheelchair ”switches itself off” after a cer-
tain period of inactivity (20-30 min.). The electronics’ energysaving mode has been
activated. Switch the wheelchair on again using the start
key on the control panel.
The wheelchair stops while being driven. The cable connection to the control panel has
come loose. Insert the cable in the control panel.
Main fuse triggered. See page 126
134