Page: 1/3
Technical manual, 8 Channel IR Receiver
Document Number: 205316-UK-0 Edition 1 2009-11
8 Channel IR Receiver
Spare part no: 1824645
General
This infrared receiver can be wired into powered devices (such as a door opener) so it can
be operated by sending an infrared signal from an environmental control device.
•
This infrared receiver is an eight-channel receiver with eight voltage-free relay
switches.
•
The receiver can be programmed with all Permobil infrared codes. Each channel has
a specific address, which can easily be programmed
•
The receiver relays can independently be set for bistable (latching - continuous) as
well as monostable (non-latching - temporary) function.
o
Monostable - Temporary: the output remains closed as long as the receiver
receives a command (can be compared with a push button).
o
Bistable - Continuous: the situation of the output (open/closed) changes each
time a command is received (can be compared with a switch).
•
The receiver module is equipped with 8 direct control buttons. This allows switching
a channel without the need of an infra red transmitter. This is very helpful during
installation, testing or access by a third.
