background image

INSTALLATION AND OPERATION INSTRUCTIONS

SINGLE KEG BEER DISPENSER

IMPORTANT INFORMATION

To  register  your  product,  visit  our  web  site  at  

(www.perlick.com).  Click  on  “Commercial”,  then 

“Service”. You will see the link to “Warranty Registration 

Form”. You must complete and submit this form or the 

installation date will revert back to the ship Date.
This manual has been prepared to assist you in the 

installation of your Cabinet and to acquaint you with 

its operation and maintenance.
We  dedicate  considerable  time  to  ensure  that  our 

products  provide  the  highest  level  of  customer  

satisfaction.  If  service  is  required,  your  dealer  can 

provide you with a list of qualified service agents. For 

your  own  protection,  never  return  merchandise  for 

credit without our approval.
We  thank  you  for  selecting  a  Perlick  product  and 

assure  you  of  our  continuing  interest  in  your 

satisfaction.

8300 West Good Hope Road   •   Milwaukee, WI  53223   •   Phone  414.353.7060   •   Fax  414.353.7069

Toll Free  800.558.5592   •   E-Mail  [email protected]   •   www.perlick.com

C

US

Table of Contents

Introduction ................................................................ 1

Preparing the cabinet for use

Parts List / Suggested Tools ...................................... 2

Plumbing.................................................................... 2

Electrical .................................................................... 2

Uncrating and Inspection ........................................... 2

Installing Casters ....................................................... 2

Leveling the Cabinet .................................................. 2

Installing the Faucet and Dispensing Head ............... 2

Tapping

Connecting the Keg Coupler ..................................... 3

Tapping a Single Valve Keg ....................................... 3

CO2 Information ........................................................ 4

Temperature

Beer Temperature ...................................................... 5

Temperature Control .................................................. 5

Adjusting the Temperature ......................................... 5

Cleaning

Cleaning the Beer System ......................................... 6

Cleaning the Cabinet ................................................. 6

Cleaning the Condenser ............................................ 6

General Information

How to Pour the Perfect Beer .................................... 7

Troubleshooting ......................................................... 8

Replacement Parts .................................................... 9

Wiring Diagram ........................................................ 11

WARNING: When lifting, the full weight of the 

cabinet must be supported. Lift from the cabinet 

base and not from the top. Improper lifting can 

result in severe damage to the cabinet.

 

Form No. Z2268

Rev. 09.13.2011

MODELS

□ DP32B

□ DP32S

□ DS32B

□ DS32S

Summary of Contents for DP32S















Reviews: