Column Refrigeration Service Manual
100
8.14 Drawers
8.14.1 Deli And Meat Drawer
The deli and meat drawers on the refrigerator use
push to open slides. To open, push inward on the
face of the drawer and release and the slide will
push open the drawer.
Removal
To remove the deli drawer flap, partially open
the drawer and lift up on the flap, remove the
pivot fastener on the left and right ends of the
flap. Always support the flap when removing the
fasteners.
To remove the deli and meat drawers, push to
open and then full extend the drawer, located the
release mechanism on each slide and pull forward
on the release mechanisms and pull the drawer
out. To remove the slide member from the cabinet
side wall, locate the mounting screws and remove.
Support the slide to avoid scratching the side wall
of the cabinet.
Reinstallation
To reinstall the drawers, line up the drawer
slide member with the cabinet slide member,
slide together gently, ensuring that the drawer
slide member is parallel with the cabinet slide
member. Do not force together as this can result
in damage to the ball bearing retainer and result
in ball bearings dislodging from the retainer. Once
engaged, push the drawer in all the way and
then push to open and pull the drawer out to full
extension to ensure the slide lock mechanism is
engaged.
Figure 8-14 - Deli And Meat Drawer Release
