Perlick 24" C-Series, Installation & Operation Manual

Page: 6 / 14

© 2008 5
24" C-Series Operation / Installation Manual
P r e ss tab s and pull s helf out
Figure 4. Sliding Shelf Extender Tabs
To r emove b r a c ket s ,
r emove s helf, lift f r ont
of b r a c ket to di s engage
thef r ont ke y s lot, and
pull fo r wa r d to di s engage
the r ea r ke y s lot.
Figure 5. Sliding Shelf Mounting Brackets
allowing for storage of both wine and beverages. Shelving positions are
adjustable.
Adjusting Full Extension Shelving
1. Pull the shelf out to its farthest position. Locate the tabs in the mid-
dle of both extenders (Figure 4). Press tabs and pull shelf out.
2. Reposition each bracket separately. Grasp the middle of the bracket,
pull the front end up and out, then forward to remove (Figure 5).
3. Place bracket at the desired position. Push the rear hook into the rear
key slot. Set front of bracket on the wall hook.
4. Repeat for other bracket(s).
5. Push extenders completely into the unit. Align the shelf grooves with
the extenders and slide completely into the unit.
DOOR PANEL OPTIONS
Perlick residential units offer a variety of door panel design alternatives;
solid stainless steel, solid wood overlay, stainless steel glass and wood
overlay glass.
Solid stainless steel and stainless steel glass doors are shipped from the
factory with decorative stainless steel panels and handles in place on the
appliance. If optional door lock is ordered, the unit comes pre-assembled
from the factory.
Solid wood overlay and glass wood overlay doors are designed to accept
a decorative front panel to match surrounding cabinetry and door han-
dles. The panel and door handles are supplied by the customer. If ordered
with the optional door lock, see
Door Lock Installation on page 7.
IIM MP PO OR RTTA AN NTT:: Glass with stainless trim and glass with wood trim may
sweat in conditions with relative humidity over 75%.