1.Tripod
2.adjust tube
3.Handle
4.Handle button
5.Adjust key
Tripod Screen
overview
Installation and use of the Tripod Screen
1.Remove all contents from the packaging.
Please take care as the contents are heavy.
2.Hold the unit firmly upright.
3.Open the tripod legs (1) slightly for stability.
4.Push on the Adjust Key (5), lift
the Drop Tube (6) until it clicks.
6.Rotate the Screen Housing (10)
horizontally with the screen
facing upwards.
Rovolve around
angle 90°
7.Lift the screen (9) by holding on to the Hang Strip (12) gently.
N.B. there are three indents on the rotary pole, you can place the
screen on any of them to adjust the angle of the screen.
8.Then gently lift the unit and open the Tripod legs (1) fully until
stable.
9.The screen size can now be adjusted up or down until held in
place by the click. Care must be taken whilst doing this, one hand
on the Adjust Key (5) and one hand on the Drop Tube (6). As soon
as the Adjust Key is pressed the Drop Tube will drop rapidly! This
can cause injury if the Drop Tube is not held firmly.
6.Drop tube
7.Topside tow bar
8.Poliing
9.Screen
10.Housing
11.Rotary locking pleses
12.Hang strip
13.Tripod fork
1
2
3
4
5
6
12
8
9
10
13
8
10
11
11
7
12
13
