4
Step 3
For Flat TV with Inset Holes or Cable Interference or Rounded TV
First, make sure the diameter of the bolt(D1-E3) fits your TV. Then, please see
the diagram above. You will need to thread the bolt into the TV using the washer
(B) and spacer (C1 or C2) if necessary with a screwdriver(Not included). Please
make sure the monitor brackets(05/06) are vertically centered and level with
each other.
Assemble Wallplate
3-1
Manual Only!
B
D2/E2/E3
C1/C2
DO NOT overtighten.
Tighten only until snug.
Top of TV
Bottom of TV
05
06
F1
01
04
02