Perlegear PGMTK1, Quick Start Manual

Page: 1 / 2

Wall Plates
Left TV
Bracket
Right TV
Bracket
MEDIUM TILT
TV WALL MOUNT
For
23”-55”
(58-140 cm)
TVs
Model PGMTK1
Select TV Screw Diameter Select TV Screw Length
FLAT BACK ROUND BACK CABLES INSET HOLES
A
B
Too Short
Too Long
Correct
Stud
Finder
Awl or
Thin Nail
Pencil Level
Drill
Socket
Wood Drill
Tools:
01 x1
02
x1
03
x1
Position your TV
bracket configuration
(
A
or
B
) over your TV
hole pattern - making
sure the bracket is
centered over the
TV hole pattern and
level. Secure bracket
using your screw/
washer ( A-Flat Back )
or spacer/screw/
washer ( B-Round
Back / Extra Space
)
selection.
CAUTION:
Ensure TV bracket
is securely fastened
before moving on to
the next step.
Rev.02
Attach the TV Bracket
If your TV has a flat back AND you want your TV closer to
the wall, use the shorter screws (A).
Use the spacers and longer screws (B) to accommodate:
• Round/irregular back TVs
• TVs with inset mounting holes
• Extra space needed for cables
CAUTION:
Verify adequate thread
engagment with the screw or
screw/spacer combination.
- Too short will not hold the TV.
- Too long will damage the TV.
Hand thread screws into the threaded inserts
on the back of your TV to determine which
screw diameter ( M4, M5, M6, or M8 ) to use.
66 lbs.
(30 kg)
Does your TV weight more
than 66 lbs. (30 kg) including
accessories?
No — Perfect!
Yes — This mount is NOT compatible.
WARNING:
Exceeding the weight
capacity can result in serious personal injury
or damage to equipment! It is the installer's
responsibility to make sure the weight of the
TV (with accessories) does not exceed 66 lbs
(30 kg).
A
B
WARNING:
This
product contains small
items that could be
a choking hazard if
swallowed.
Before starting
assembly, verify all
parts are included and
undamaged. If any parts
are missing or damaged,
do not return the
damaged item to your
dealer; contact Customer
Service. Never use
damaged parts!
Drywall with
wood studs?
Perfect!
?
What is your wall made of?
Please read
through these instructions completely to be sure you’re comfortable with
this easy install process. Also check your TV owner’s manual to see if there are any
special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the
installation, assembly or use of this product, contact Customer Service at
customerservice@perlegear.com
CAUTION:
Avoid potential personal injuries and property damage!
●
This product is designed for use in wood stud walls - DO NOT install into drywall alone
●
The wall must be capable of supporting fi ve times the weight of the TV and mount combined
●
Do not use this product for any purpose not explicitly speci fi ed by manufacturer
●
Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
Standard configurations
are shown. For special
applications, or if you
are uncertain about your
hardware selection,
contact Customer Service
at customerservice@perl
egear.com
Contact Customer Service:
customerservice@perlegear.com
Screw
driver
1/2 in.
(12.7 mm)
7/32 in.
(5.5 mm)
Lag Bolts
x4
Philips Screws
M6 x 15mm
M6 x 30mm
Philips Screws
M4 x 12mm
M4 x 30mm
Philips Screws
M5 x 12mm
M5 x 30mm
Washers
Ø6mm
M4-5-6
Spacers
L10mm
x4 x4 x4 x4 x4 x4
Philips Screws
M8 x 15mm
M8 x 30mm
x4 x4 x4 x4
M-G M-H M-I
M-J
Spacers
L5mm
x8
M-K
Allen
Wrench
x1
C A
Washers
Ø8mm
x4
B
M-J
M-E M-G
M-C M-A
M-J
M-K
M-I
M-F M-H
M-D M-B
Hardware
(Wall / Procduct)
TV Screws / Washers
5/16 x 2½ in
M6 M4 M5 M8
STEP 1-1 STEP 1-2
STEP 1-3
(included
inside the box)
02
03
03
02