Fiber Fault Alert
Enabled (Default - Up)
With Fiber Fault Alert the state of the 10 Gigabit ethernet receiver is passed to the
transmitter. This provides fault notification to the partner device attached to the 10G
ethernet interface of the media converter
Disabled (Down)
Test Mode
Through the use of three dip switches the unit, and its peer, can be placed into a link test
mode which will verify the integrity of the link through the use of its built-in link test
generator. The unit can also be placed into a simple line loopback.
EEE Green
Ethernet
When enabled (default), the media converter will operate as an IEEE 802.3az Energy
Efficient Ethernet (EEE) compliant device.
Loopback
Capable of performing a loopback on the 10 Gigabit interface. In this mode, all frames
received on the port in loopback mode will be transmitted back. This provides users with
the capability of utilizing their own in-house test generators for testing the link.
Connectors
10GT to SFP
10GT to XFP
10GBase-T
(RJ45)
IEEE 802.3an
100 meters on CAT6A or better
IEEE 802.3an
100 meters on CAT6A or
better
Pluggable 10G
Fiber
Transceiver
slot ( Hot
insertion and
removable)
10 Gigabit SFP+ Slot
Power level 1, 2
10 Gigabit XFP Slot
Power level 1,2,3,4
Voltages
supplied to XFP
slots
-
1.8V, 3.3V, 5V and -5.2V
Supported 10
Gigabit Fiber
pluggable
transceivers
IEEE 802.3ae compliant:
10GBase-SR
10GBase-LRM
10GBase-LR
10GBase-ER
10GBase-ZR
CWDM/DWDM
IEEE 802.3ae compliant:
10GBase-SR
10GBase-LRM
10GBase-LR
10GBase-ER
10GBase-ZR
CWDM/DWDM
Supported 10
Gigabit Copper
pluggable
transceivers
SFP+ Direct Attach Cable (DAC). Also known as:
Twinax
10GBase-CU
Cu
10GBase-CX1
10GBase-CR1
IEEE 802.3ak compliant:
XFP 10GBase-CX4
copper
