10-100-1000 Industrial Media Converter | Diagrams | Perle
Fast Ethernet to IP Cameras
Connect 10/100/1000 IP Cameras to Fast Ethernet Backbone
Extend the reach to IP cameras using industrial fiber media converters. Security cameras are typically installed in remote
locations where extremely high or low temperatures are a concern -- ceilings, rooftops, light poles, along fences, pipelines
and transit routes.
Stand-alone Extended Temperature Media Converters are placed at the remote end connecting cameras with copper
interfaces to fiber optic cabling. The fiber can extend the distance up to 20 kilometers using single mode or multimode
fiber back to a control center. A media converter chassis located in the data closet at the control center accepts the fiber
signal, converts it, and connects to the copper equipment at the main site.
Fast Ethernet Fiber to Wireless Access Points
Connect 10/100/1000 Wireless Access Points to Fast Ethernet Backbone
Extend the reach to wireless access points ( AP ) using fiber media converters. When a company deploys a wireless
network in their office or large warehouse, APs need to be set up throughout the facility to ensure complete coverage for
reliability. The network manager will likely need to extend further than the 100 meters allowed by copper cable to reach
many of the APs.
When AP’s are used in industrial environments where extremely high or low temperatures are a concern, Stand-alone
Extended Temperature Media Converters are placed at the remote end connecting APs with copper interfaces to fiber
optic cabling. The fiber can extend the distance up to 20 kilometers using single mode or multimode fiber back to a control
center. A media converter chassis located in the data closet at the control center accepts the fiber signal, converts it, and
connects to the copper equipment at the main site.
Bridge 10/100 Devices to gigabit Backbone
Connect 10/100 devices to Gigabit Backbone
Industrial switches are often used in environments where extremely high or low temperatures are a concern. Devices in an
industrial environment can be connected to a Gigabit backbone through the use of rate converting Industrial Temperature
Media Converters.
