Perle Standalone-S10-GR-STS-Installation Guide
7
Cut-through / Rate converting (Switch 3)
Switch Position Type
Up (default)
Rate converting
Down
Cut-through
Rate converting:
Both ports can operate at the
same or different speeds.
Cut-through:
Both ports need to be the same
speed and in full duplex mode.
Fiber Interface Lookback (Switch 4)
Switch Position Mode
Up (default)
Disabled
Down
Enabled
Enabled:
When enabled, the media converter will
be in fiber loopback mode.
Disabled
: When disabled, the media converter will
not be in fiber loopback mode.
Fiber Loopback Interface (Switch 5)
Switch Position
Mode
Up (default)
Port 1
Down
Port 2
UP:
The media converter will perform loopback
testing on Port 1.
Down:
The media converter will perform loopback
testing on Port 2.
Not Used (Switch 6 and 7)
