Gigabit Media Converter – Installation Guide
2
Overview
This document contains instructions necessary for the installation
and operation of the Perle Gigabit Standalone Ethernet Media
Converters (S-1000). These products convert a 1000Base-TX
cable connection (copper) to a 1000Base-X connection (fiber). The
fiber connection can be either single mode (SM) or multimode
(MM) and can operate over different wavelengths and distances,
depending on the model selected (see table below).
Model
Connector
(xx)
Mode - Distance
Wavelength
(TX/RX)
S-1000-M2xx05
SC/ST/LC
MM - 550 m/1804 ft.
850 nm
S-1000-M2xx2
SC/ST/LC
MM - 2 km/1.2 mi.
1310 nm
S-1000-S2xx10
SC/ST/LC
SM - 10 km/6.2 mi.
1310 nm
S-1000-S1SC10U
SC
SM - 10 km/6.2 mi.
1310/1490 nm
S-1000-S1SC10D
SC
SM - 10 km/6.2 mi.
1490/1310 nm
S-1000-S1SC20U
SC
SM - 20 km/12.4 mi.
1310/1490 nm
S-1000-S1SC20D
SC
SM - 20 km/12.4 mi.
1490/1310 nm
S-1000-S2xx40
SC/ST/LC
SM - 40 km/25 mi.
1310 nm
S-1000-S1SC40U
SC
SM - 40 km/25 mi.
1310/1490 nm
S-1000-S1SC40D
SC
SM - 40 km/25 mi.
1490/1310 nm
S-1000-S2xx70
SC/ST/LC
SM - 70 km/43.5 mi.
1550 nm
S-1000-S1SC80U
SC
SM - 80 km/50 mi.
1510/1590 nm
S-1000-S1SC80D
SC
SM - 80 km/50 mi.
1590/1510 nm
S-1000-S2xx120
SC/ST/LC
SM - 120 km/74.6mi
1550 nm
S-1000-S1SC120U
SC
SM - 120 km/74.6 mi.
1510/1590 nm
S-1000-S1SC120D
SC
SM - 120 km/74.6 mi.
1590/1510 nm
S-1000-S2xx160
SC/ST/LC
SM - 160 km/100 mi
1550 nm
S-1000-SFP
SFP
Note 1
Note 1: Fiber characteristics will depend on the SFP fiber module
selected
Note 2: Please visit Perle’s web site for the most up to date
Installation guides, models and specifications:
http://www.perle.com/
