Perle IRG5521+ FN Quick Start Manual Download Page 4

Page: 4 / 4

FN Router Quick Start Guide 5500477-10 (Rev A)

Version #A1.05.03.2021

Fast Setup Mode

Your router ships in factory default mode. Fast Setup Mode

provides a simple method of doing the initial setup from your

PC.

Your PC must be set to obtain an IP address

automatically using DHCP.

Plug the PC into your router’s Ethernet interface or

connect to the wireless LAN (WIFI) using the

credentials printed on your router’s label.

When the power LED flashes green, use a web browser

and enter

to access your router.

On the setup screen, select, Getting Started.

Once connected, fill in the required fields, apply changes

to save and exit. These configuration changes are

immediately applied to the router.

The router’s web configuration sign-on screen displays.

Using the previously defined credentials from step 4,

you can access your router’s full configuration.

For alternative methods of performing an initial setup, see the

FN Router Hardware Installation Guide.

Summary of Contents for IRG5521+ FN

Page 1: ...ion Guide IRG5000 Series Routers User s Guide IRG5000 Series Routers Command Line Reference Guide What s in the box IRG5521 FN Router IRG5521 Router Quick Start Guide this guide 2 LTE SMA antenna pack...

Page 2: ...p Mode Inserting the SIM cards Use only mini SIM 2FF cards Disconnect the power before you insert the SIM card s see below 1 Unscrew the screws and gently pry the SIM cover loose from the opening see...

Page 3: ...tor WLAN 2 5 Connect your GPS antenna to connector GNSS See Figure 2 Connecting the Power See Figure 2 for wiring requirements Colors indicated are for the Perle supplied DC power cable Connecting to...

Page 4: ...outer s label 3 When the power LED flashes green use a web browser and enter http 192 168 0 1 to access your router On the setup screen select Getting Started 4 Once connected fill in the required fie...