background image

IDS-509FPP Switches Quick Start Guide    P/N 5500367-10 (Rev A)        

 

Version #A1.13.03.2017

                                

 

IDS-509FPP Switches 

Quick Start Guide 

___________________________________________________ 

This guide covers basic installation and configuration and is intended for first time 
setup or product evaluation.  

Complete details can be found in the following guides at 

www.perle.com/downloads

 

IDS-509FPP Hardware Installation Guide 

 

IDS Managed Switches User Guide – Pro Feature Set 

 

IDS Managed Switches CLI Guide – Pro Feature Set 
 

What’s in the box? 

 

The IDS switch 

 

Quick Start Guide (this document) 

 

Hardware Overview

 

 

         Front View  

                      Back View 

  

 

 

1 – Terminal Block for Power 1, 2 

7 – PoE/PoE+ Enabled Ethernet Ports 

2 – Status LEDs 

8 – SD  Card Slot 

3 – Console Port – serial 

9 – Digital Inputs/Relay I/O 

4 – Console Port – USB 

10 – Reset/FS(Fast Setup) 

5 – DIP switches 

11 – Fiber Status LEDs  

6 – 100Base-X Fiber Ports 

12 – Wall Mount Bracket Screw Holes  

13 – DIN Rail Clip 

 

 
 

Summary of Contents for IDS-509FPP

Page 1: ...rle com downloads IDS 509FPP Hardware Installation Guide IDS Managed Switches User Guide Pro Feature Set IDS Managed Switches CLI Guide Pro Feature Set What s in the box The IDS switch Quick Start Guide this document Hardware Overview Front View Back View 1 Terminal Block for Power 1 2 7 PoE PoE Enabled Ethernet Ports 2 Status LEDs 8 SD Card Slot 3 Console Port serial 9 Digital Inputs Relay I O 4 ...

Page 2: ...er source is off prior to connection 2 Using a pair of 12 16AWG wires strip them both 7 8mm 5 16 3 Loosen the terminal block screws and connect positive negative wires in the terminals 4 Tighten terminal screws 0 51Nm torque Ensure the wires are securely fastened 5 Re insert the terminal block connector if removed Turn power on at source Check LED indicators for status 6 Connect P2 power source 2 ...

Page 3: ... Inputs Green P1 and P2 Power inputs are within specifications Orange P1 or P2 not providing power within specifications Red Neither P1 or P2 providing power within specifications SYS System status Green blinking System booting Green solid System operating normally Green blinking fast Fast Setup mode activated Red Hardware fault or firmware load error Ethernet Port Link Speed Green and Yellow LEDs...

Page 4: ...the switch a small tool such as a paper clip will be required The yellow and green LEDs on an unused RJ 45 connector will flash rapidly to indicate where to plug in the Ethernet cable from your PC 3 Using a web browser enter to a well known webpage such as www google com you will be automatically directed to the IDS Get Started screen Note While in Fast setup mode the IDS switch will use an IP add...

Reviews: