background image

 

IDS-509 Switches 

Quick Start Guide 

___________________________________________________ 

This guide covers basic installation and configuration and is intended for first time 
setup or product evaluation.  

Complete details can be found in the following guides a

www.perle.com/downloads

. 

 

IDS-509 Hardware Installation Guide 

 

IDS Managed Switches User Guide – Pro Feature Set 

 

IDS Managed Switches CLI Guide – Pro Feature Set 
 

What’s in the box? 

 

The IDS switch 

 

Quick Start Guide (this document) 

 

Hardware Overview

 

 

         Front View  

                      Back View 

 

 

1 – Terminal Block for Power 1, 2 

7 – SD Card Slot 

 

 

2 – Status LEDs 

8 – Terminal Block – Relay, I/O 

3 – Console Port – serial 

9 – Reset / FS (Fast Setup) 

4 – Console Port – USB 

 

10 – Wall Mount Bracket Screw Holes 

5 – DIP switches 

11 – DIN Rail Clip 

6 – 10/100/10100 Base-T  - Ethernet Ports 

 

 

 

Summary of Contents for IDS-509

Page 1: ...S 509 Hardware Installation Guide IDS Managed Switches User Guide Pro Feature Set IDS Managed Switches CLI Guide Pro Feature Set What s in the box The IDS switch Quick Start Guide this document Hardware Overview Front View Back View 1 Terminal Block for Power 1 2 7 SD Card Slot 2 Status LEDs 8 Terminal Block Relay I O 3 Console Port serial 9 Reset FS Fast Setup 4 Console Port USB 10 Wall Mount Bra...

Page 2: ... Using a pair of 12 20AWG wires strip them both 7 8mm 5 16 3 Loosen the terminal block screws and connect positive negative wires in the terminals 4 Tighten terminal screws 0 51Nm torque Ensure the wires are securely fastened 5 Re insert the terminal block connector if removed Turn power on at source Check LED indicators for status 6 Connect P2 power source 2 beginning at Step 1 For complete wirin...

Page 3: ...Neither P1 or P2 providing power within specifications SYS System status Green blinking System booting Green solid System operating normally Green blinking fast Fast Setup mode activated Red Hardware fault or firmware load error Ethernet Port Link Speed Green and Yellow LEDs 1000 Mbps Green on Yellow off 100 Mbps Green on Yellow on 10 Mbps Green off Yellow on Note Flashing indicates activity Note ...

Page 4: ...recessed in the switch a small tool such as a paper clip will be required The yellow and green LEDs on an unused RJ 45 connector will flash rapidly to indicate where to plug in the Ethernet cable from your PC 3 Using a web browser enter to a well known webpage such as www google com you will be automatically directed to the IDS Get Started screen Note While in Fast setup mode the IDS switch will u...

Reviews: