Perle 10/100 Media Converter Module – Installation Guide
9
Duplex (fiber) (Switch 6)
Switch Position Mode
Up (default)
Full
Down
Half
Up: The Media Converter Module’s fiber link will be set to Full
Duplex Mode.
Down: The Media Converter Module’s fiber will be set to Half
Duplex Mode.
Loopback (Switch 7
Switch Position Mode
Up (default)
Disabled
Down
Enabled
Disabled: This is the setting for normal operation. The switch
must be set to this position in order for data to pass through the
Media Converter Module.
Enabled: This is a test mode. All data received on the receive
(RX) fiber connection is looped back to the transmit (TX) fiber
connection. The state of the copper link is not relevant since no
data is passed through to the copper side. This mode will override
all other switch settings.
