Illustration 37
g06302436
Typical example
(A) Tensioner stop
(3) Tensioner body stop
(B) Tensioner stop
4.
Ensure that the tensioner has full movement of
travel from stop (A) the other stop (B). Using a
constant force the tensioner should move
smoothly between the tensioner stop and the
tensioner body stop.
5.
If necessary, replace damaged components.
Install the belt. Refer to Disassembly and Assembly,
“Alternator Belt - Remove and Install”.
i07383167
Coolant
(Commercial
Heavy-
Duty)
-
Change
Note:
This
procedure
is
for
coolants
that
meets
a
commercial
heavy-duty
coolant
specification
of
“
ASTM
D6210
”
.
Clean
the
cooling
system
and
flush
the
cooling
system
before
the
recommended
maintenance
interval
if
the
following
conditions
exist:
• The engine overheats frequently.
• Foaming is observed.
• The oil has entered the cooling system and the
coolant is contaminated.
• The fuel has entered the cooling system and the
coolant is contaminated.
NOTICE
When any servicing or repair of the engine cooling
system is performed, the procedure must be per-
formed with the engine on level ground. Level ground
will allow you to check accurately the coolant level.
This procedure will also help in avoiding the risk of in-
troducing an air lock into the coolant system.
Note:
Inspect the water pump and the water
temperature regulator after the cooling system has
been drained. This inspection is a good opportunity
to replace the water pump, the water temperature
regulator, and the hoses, if necessary.
Drain
Pressurized System: Hot coolant can cause seri-
ous burns. To open the cooling system filler cap,
stop the engine and wait until the cooling system
components are cool. Loosen the cooling system
pressure cap slowly in order to relieve the
pressure.
1.
Stop the engine and allow the engine to cool.
Loosen the cooling system filler cap slowly to
relieve any pressure. Remove the cooling system
filler cap.
Note:
Refer to Operation and Maintenance Manual,
“General Hazard Information” for information on
Containing Fluid Spillage.
M0108133-04
79